Bolt & Screw extractors

This set contains screw extractors and HSS drill bits. Simply drill a pilot hole in the broken fixing and screw in the left hand threaded extractor for easy removal of broken screws and bolts. Includes: Extractors: 3-6, 6-8, 8-11, 11-14, 14-18 and...

Simply insert the specially designed bit and put the drill in reverse, center on the screw head or middle of bolt and activate drill, it may start to drill into the screw or bolt slightly but will soon catch and grab the bolt so that it unscrews. All...

This heavy duty extractor set is ideal for removing old studs, bolts and damaged screws. Hex drive extractors in the following sizes:       Metric: 3, 4, 5, 5.5, 6, 8, 10mm (12mm Hex Drive) 11, 12, 14mm (16mm Hex Drive)  ...

Extracts screws and bolts. Can be used on thread sizes from 5mm to 16mm. Removes broken fasteners without breaking or jamming. Turns broken fasteners and screws out and permits highest torque expansion     Includes: HSS drill bits: 1/8",...

This twist socket set is specially designed for removing rounded nuts bolts and studs. As you turn the socket anti clock wise the spiralled cutting blades grip and remove the nut or stud. Sizes: 10, 11, 12, 13, 14, 15, 16, 17 and 19mm Drive: 3/8"...

Head studs, main studs, carburettor studs, or any other stud can be problematic when it's time to remove them. This tool is designed to remove difficult threaded studs or install them. Sizes from 1/4" to 3/4" (M5 - M18). All that's required is a 1/2"...

These screw extractors enable rounded or rusted hexagonal nuts, bolts or screws to be removed. Sizes 9, 10, 11, 12, 13, 14, 15, 16, 17, 19mm Includes 7mm x 90mm round bar Supplied in a storage case

A 13 piece set of 3/8" drive impact sockets for extracting damaged bolts. Spiral cut teeth provide a positive grip to remove rounded or damaged bolts & nuts. Can also be used on screw heads and studs. Will fit head sizes: 1/4", 5/16", 3/8", 10mm,...

Ideal for removing broken, stripped and rusted studs. As well as threaded rods and broken bolt shanks. The stud extractor is adjustable to fit studs that are anywhere from 1/4" to 1/2" (6-12mm). Can be used with a 3/8" wrench, hand ratchet or impact...

Set contains: 5 - Screw tapered extractors: 1 x Ranging from M3 to M6 1 x Ranging from M6 to M8 1 x Ranging from M8 to M11 1 x Ranging from M11 to M14 1 x Ranging from M14 to M18 4 - Stud Sockets: 6mm, 8mm, 10mm and 12mm 8 - Jagged profile non slip...

Multi-spline extractors to remove broken studs, pipes, set screws, grease fittings, etc 3/8" Drive Suitable for use with an impact wrench Contains: 2mm,3mm,4mm,6mm,8mm,10mm Made from CR-MO molybdenum steel with heat treatment to obtain maximum...

This twist socket set is specially designed for removing rounded nuts bolts and studs. As you turn the socket anti clock wise the spiralled cutting blades grip and remove the nut or stud.    Sizes: 17, 19, 21 and 22mm Drive: 1/2" Square With...

Hex head multi-spline extractors to remove broken studs, pipes, set screws, grease fittings, etc Full-length flutes provide easier extractor starting. Can be used with hand sockets and wrenches. Sizes: 3, 4, 5, 5.5, 6, 7, 8, 9, 10, 11 Also suitable for...

Locks on to protruding studs by a roller cam action. This reduces the chance of damaging the thread. Sizes: 6, 8, 10 and 12mm 1/2" Drive Sockets The outer diameter of 6mm and 8mm socket: 25mm The outer diameter of 10mm and 12mm socket: 28mm

Coarse thread extractors for removing Studs and Screws from 3 to 18mm in diameter Contents: 4mm, 4.5mm, 6.4mm, 7.6mm and 11mm

US PRO Tools 5PC 1/2" DR Impact Twist Socket Set Damaged Nuts Bolts & Studs Removal For removing damaged wheel nuts and locking nuts. Especially useful on deep seated wheel nuts on modern alloys. As you turn the socket anti-clockwise the spiraled...

Used for stud removal and stud fitting. The extractors have concentric roller bearings that won't damage the thread on the stud. 1/2" drive High quality Chrome Molybdenum Steel with black phosphate finish      Sizes: M6 x 1.0mm M8 x 1...

Reverse spiral flutes are designed to bite down to provide maximum gripping power. Useful for trying to free rounded-off, rusted-tight or painted-over bolts. Sizes: 1/4" (6.0mm), 5/16" (8.0mm), 3/8" (9.5mm), 7/16" (11.0mm), 1/2" (12.7mm) Drive size:...

Designed to remove broken studs, bolts etc. Phosphate finish for corrosion resistance Chrome molybdenum for strength Left-hand spiral design for extra gripping power Hexagon shaped so can be used with a spanner 3/8” Drive - Drill sizes: 2, 3, 4,...