Steering & Suspension tools

Professional high-quality coil spring compressor 370mm This pair of spring compressors are ideal for repairing and replacing shock absorbers, struts and springs. The kit comprises of two identical spring compressors, each measuring...

US PRO Tools 27pc Master Press And Pull Sleeve Kit 6262 Universal tools set for extracting and drawing in. For Silent Bearings, Hydraulic Bearings, Bearing Bushes, Ball Bearings, Shaft Seals, Rubber Bearings etc. Fully Universal Application. 5 x Pulling...

Use to separate ball joints and tie rods. One handle fits air hammer and the other for use with a regular hammer. Drop forged chrome vanadium steel forks. Piloted handles act as shock absorbers to protect handle threads. Both of the handles...

12-tonne hydraulic ram unitScrew mechanism converts power to 12 tone ram head with enough force to remove most stubborn bearings/pulleys and shaftsSuitable for pulling hub, flanges, gears and bearings12-ton ball joint splitter...

The master tie rod tools easily replace inner tie rod ends from 27-42mm diameter without removing the rack and pinion Special design to be used with 1/2" Square drive tools.    Specifications: 1/2" sq. drive Reversible Length: 80mm Width:...

Heavy-duty Ball Joint Splitter suitable for commercial vehicles Designed to be operated manually or by 12 Ton Hydraulic Ram supplied.  Features a step down thread adaptor that allows fitting of the manual thrust screw or Hydraulic Ram. Maximum Jaw...

US PRO Tools 5pc Strut Nut Tool Set AUDI VW Mercedes Suspension Refit Tools 6220 Set of keyed nuts designed to hold the damper shaft during the removal and refitting of the strut nuts. Suitable for: VW / AUDI - 10.5mm, 12.5mm, 2 x 14.5mm, MERCEDES...

Adjustable seal driver for 35 to 43mm diameter forks Split design for easy operation on both conventional and inverted forks Chrome plated for corrosion resistance Knurled grip This high quality Fork Seal Drive comes to you brand new with retail...

US PRO Tools CV Clamp Tool and CV Joint Boot Clamp Pliers Set 6258 CV Clamp Tool and CV Joint Boot Clamp Pliers Set set for tensioning and securing of CV boot banding strap. CV boot clamp installer With a built in cutter and winding mechanism the banding...

200mm (8") approx fork style ball joint splitter. Separates ball joint from steering knuckles. Suitable for most cars and small commercial vehicles. Flared striking end. Tapered Jaws. Gap between jaws 18mm approx. This high quality Ball Joint Splitter...

Removes tie rod ends and pitman Arm assemblies from many cars and light trucks. Opening size 33mm

Tool to aid removal and installation of automotive coil springs up to 5- 5/8" outside diameter. Designed to grasp a spring with a maximum 3/4" wire diameter.  Manufactured from heat treated tempered steel and drop forged steel claws for added...

Seal driver for 43mm diameter forks Split design for easy operation on both conventional and inverted forks Chrome plated for corrosion resistance Knurled grip This high quality Fork Seal Drive comes to you brand new with retail packaging/tag This is a...

US PRO Tools 4pc 30 - 45mm Steering Rack Rod Knuckle Axle Joint Removal Tool 6264 This tool set allows a quick and easy removal and replacement of the inner steering ball joint without the need to dismantle the steering rack from the bulkhead. Automatic...

US PRO Tools 26pc Universal Master Internal / External Press And Pull Bearing Sleeve Kit Universal tools set for extracting and drawing in. For Silent Bearings, Hydraulic Bearings, Bearing Bushes, Ball Bearings, Shaft Seals, Rubber Bearings etc. Fully...

Universal ball joint separator set with a selection of popular jaw sizes. Simple and effective quick change system to select the correct jaw size required. Jaw sizes: 20, 22, 24, 27 and 30mm Thrust screw length: 100mm Pivot rod length: 125mm Quick...

This master set allows you to build your own custom bushing driver. Select the required sizes and assemble your driver tool.Discs are 18mm through to 65mm shaft and screw which connects to the 220mm handle. Build to suit the required seal, bush or...

US PRO Tools Motorbike Fork Seal Driver Insertion Tool 48mm 6824 Seal driver for 48mm diameter forks Split design for easy operation on both conventional and inverted forks Chrome plated for corrosion resistance Knurled grip This high quality Fork Seal...

Designed for removing and replacing shock absorbers, allows the removal of the top suspension nut by holding the strut piston so it doesn’t rotate while turning the nut. The go-through design of the socket and ratchet allows the extension to pass...

Ideal for removing gears, pulleys and steering wheels Heavy duty steel 2 x bearing splitters (2" and 3" jaws) (30-50mm & 50-75mm) 1 x h-type beam, 1 x lead screw,  2 x 6" yoke adaptor, 2 x 5" extension screws  1 x 4" screws with male...