Pullers & Slide Hammers

Heavy duty construction with a locking feature for secure operation. With a swivel mounted thrust bearing and tommy bar, this tool will release the most stubborn wiper arms and battery terminals. Jaw opening: 6 - 28mm

Inner bearing puller set complete with 940g Chrome slide hammer and 4 different sized chrome molybdenum steel split collets.    Features: Bearing extractor collects with internal capacity from 10 to 32mm Fully chromed carbon steel medium...

Sliding 2-arm universal gear puller with constantly parallel claws. This tool serves both as outside and inside puller.  Uniform load distribution with excellent hold on the part to be pulled.  Steel ball inserted mandrill It is 120mm wide x...

3 piece three leg gear puller set 1 x 3" (75mm) Three Leg Gear Puller 1 x 4" (100mm) Three Leg Gear Puller 1 x 6" (150mm) Three Leg Gear Puller All sizes are approximate. Reversible arms for inside & outside grip. Swivel thrust plates on larger sizes...

US PRO Tools Small Bearing Bush Seal Puller 19- 35mm, Armature 5153 This armature bearing puller is designed for armatures on cars, electric power tools and other electrical products. Supplied with lock on bolts to hold the puller legs into position...

Removes tie rod ends and pitman Arm assemblies from many cars and light trucks. Opening size 33mm

US PRO Tools 150mm 2 Jaw Sliding Arm Gear Puller 5168 sliding 2-arm universal gear puller with constantly parallel claws. This tool serves both as outside and inside puller. Uniform load distribution with an excellent hold on the part to be pulled...

2 Leg design. Reversible for internal & external use. Range: 6" (50 - 150mm) 15mm Socket drive. Drop forged steel construction. Ideal for small bearings, pulleys, gears etc.

This armature bearing puller is designed for armatures on cars, electric power tools and other electrical products. Supplied with lock on bolts to hold the puller legs into position. Spread: 24 to 55mm (15/16" to 2 3/16")

Ideal for removing gears, pulleys and steering wheels Heavy duty steel 2 x bearing splitters (2" and 3" jaws) (30-50mm & 50-75mm) 1 x h-type beam, 1 x lead screw,  2 x 6" yoke adaptor, 2 x 5" extension screws  1 x 4" screws with male...

Designed for pulling drive shafts into hubs.    Adapters included are: M16 x 1.5 for Subaru M20 x 1.5 for Volkswagen Beetle, Touareg and Porsche Cayenne M22 x 1.5 for BMW E30 M24 x 1.5 for BMW E36 and Mercedes-Benz W203 M27 x 1.5 for BMW...

2 Leg design. Reversible for internal & external use. Range 4" (50mm to 100mm) 15mm Socket drive. Drop forged steel construction. Ideal for small bearings, pulleys, gears etc.

Master set of gear pullers and bearing separators supplied in carry-case.  10T Ram with enough force to remove most stubborn bearings, pulleys and shafts  Contents: 10T Hydraulic Ram, 3pc 4" (100mm) Leg Set 3pc 6" (150mm) Leg Set 3pc 8"...

Use to remove worn or damaged harmonic balancers onall types of vehicles Set Includes 1pc carbon steel yoke 1pc 5’’ carbon steel pressure screw 3/4’’ - 16TPI 2pc small & large centering adapters 1pc flat shaft adapter 3pc 1 -...

For removing gear, pulleys, bearings etc. Range: 4" (50 - 100mm) Reversible for internal or external use Hex head forcing screws suitable for use with ratchet wrench or combination spanner

US PRO Tools Large Bearing Bush Seal Puller 35 - 80mm, Armature 5155 This armature bearing puller is designed for armatures on cars, electric power tools and other electrical products. Supplied with lock on bolts to hold the puller legs into position...

US PRO Tools 2 Jaw Adjustable Puller 0 - 64mm 5164 A 2 jaw puller which can be adjusted between 0 to 64mm opening. The thrust bolt can travel approximately 83mm. Jaw opening 0 - 64mm Thrust bolt travel maximum travel 83mm 17mm Hex thrust bolt This high...

Drop forged. heat treated steel attachments. hardened and tempered, precision machined steel bolts. Remove gears, pulleys, steering wheels and separate bearings. Black oxide finish for durability. A comprehensive set that can be put to many uses...

For removing gear, pulleys, bearings etc. Range: 6" (60 - 150mm) Reversible for internal or external use Hex head forcing screws suitable for use with ratchet wrench or combination spanner