Fuel & Injection Tools

Hard wearing and double dipped handle for comfort when pressure is applied. Aluminium alloy construction with profiled head. These fuel feed pipe pliers are suitable for releasing connections on in-line fuel line filters during servicing and maintenance...

Set of 17 diesel injector seat cutters/cleaners centering pilot and T-handle. This set is used to clean and decarbonize injector seats when changing injectors. It helps to avoid blow-back due to poorly seated injectors. Suitable for a wide range of...

The Dial Indicator and Holder tools are used for the accurate setting of the Bosch diesel fuel injection pump timing. The holder screws into the back of the injection pump, giving a reading on the Dial Indicator necessary for setting the correct pump...

Set of 5 cutters for re-cutting injector seats when reconditioning diesel engines or replacing the injectors. Injectors can be extremely difficult to remove, due to the build up of carbon deposits and the effects of corrosion. Once they have been...

US PRO Tools 9pc Common Rail Injectors Extractor Remover Set 5584 This professional tool is a specialised sliding hammer for removal of common rail injectors on DB CDI-engines & Mercedes CDI engines OM 611, 612, 613 etc Adaptor: M17 x 1.0 Adaptor:...

US PRO Tools Diesel Injector Puller / Remover Tools for Mercedes CDI Engine Sprinter C/E Class 5585 Specially designed for the removal of stubborn diesel injectors fitted on Mercedes CDI engines. Features injector cap removal socket, security hex key for...

Contents: 1. 7MM - EDC pump cover socket from 1996 to 2003. 2. 12.6MM - Bosch VE Diesel pump socket used on VAG systems Bosch Distributor injection pumps each with 1/2" square drive. 3. Triangular nut to loosen cover screw 4. Triangular not to loosen...

Adaptor Set for Common Rail Flow Meter This 24 piece set will adapt any common rail flow meter set to fit Denso C3, C1 Siemens C2 and Delphi. Can be used to either expand your own unit or replace lost and broken parts Supplied in a blow molded case

Petrol engine fuel pressure tester comes with fuel Injection manual and a large assortment of fittings. Can be used for nearly all injection systems e.g. : Bosch L/LH-Jetronic, Bosch K-Jetronic, Bosch CIS, MPFI, TBI, EFI, CFI, Isuzu I-TEC, Mitsubishi...

Set of 10 diesel injector seat cutters/cleaners centering pilot and T-handle. This set is used to clean and decarbonize injector seats when changing injectors. It helps to avoid blow-back due to poorly seated injectors. Suitable for a wide range of...

A universal tool designed for the removal and refitting of a fuel tank sender unit or fuel tank lid. The tool can be adjusted between 35mm to 170mm which enables it to cover a wide range of applications. The tool can be operated by 1/2" or 3/8" drive,...

Suitable for fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors. The set includes keys and deep open profile sockets, used to dismantle injectors, plus adaptors for attaching the slide hammer securely to the body of the injector...