Brake Tools

This tool set enables the rewinding of pistons back into the core on most disc brake calipers. Allows you to service and replace worn brake pads. Includes both right-hand and left-hand threaded rewind tools. Selection of adaptors to fit most popular...

US PRO 6pc chrome vanadium flare-nut spanner / Wrench Set 6 x double ended spanners = 12 sizes from 6mm to 24mm Made from heat treated hardened & tempered chrome vanadium steel Sizes - 8mm x 9mm 10mm x 12mm 13mm...

US PRO Tools Ratchet Brake Caliper Piston Spreader, Pad Compressor, Push Back Tool 6217 With this ratchet piston spreader the steel pads stay parallel so you can easily press back single, dual and quad piston brake calipers. There is less chance of the...

US PRO Tools Brake Caliper Disc Pad Spreader Separator Tool 6215 This tool allows the quick and easy separation of disc brake calipers. Supplied with tommy bar but can also be used with 1/2" square ratchet wrench or spanner. Capacity: 0 - 2 1/2”(...

225mm (9") Pliers for bending copper tube. Can be used for both 3/16" and 1/4" O.D. tube. PVC handle for comfort

Removes and installs all types of lock rings on brakes, transmissions, cylinders, clutches, shafts and other applications. Serrated jaws and angled tips for a secure grip. Used to spread snap rings found on brakes, pedal shafts, transmissions, clutch...

A set of 6 point flare nut wrenches in SAE. Made from heat treated hardened & tempered chrome vanadium steel Sizes: 1/4" x 5/16" 3/8" x 7/16" 1/2" x 9/16" 5/8" x 11/16" 3/4" x 13/16" 7/8" x 1"

A simple tool for testing the percentage of water in brake fluid. 5 LEDs Indicate percentage of water present in fluid. Suitable for DOT 3, 4, 5 (not suitable for silicone based DOT 5.1) Automatic Power Off Powered by 1 x AAA 1.5V Batteries...

Brake line spanner with reinforced hexagonal openings. Double Cranked Size: 10 x 11MM Length - 180mm Made from chrome vanadium steel

A pneumatic/air tool for brake caliper piston rewind. For left and right hand threaded pistons.  Suitable for most 3/8" sq Dr wind-back adaptors and pin type adaptors. 1/4" BSP High Flow air inlet bayonet fitting included. Supplied with a 3/8" sq...

Multipurpose syringe ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials. The translucent body allows easy inspection of oils and fluids. Capacity: 0.2 Ltr

These pipe bending pliers bend copper and steel tubing without kinking.  Comes complete with two roller adapters. Bends pipe sizes 1/4",3/16",5/16" and 3/8" in diameter.    Specifications: Plier design  Sizes: 1/4",3/16",5/16",3/8"...

One-man brake bleeding is made easy by using this hand-held 1L vacuum pump together with the included 0.7L new fluid fill bottle. Using standard workshop air supply (90-120psi), the kit works efficiently to flush and refill the brake system on most...

Manufactured from chrome vanadium  Hex end for sockets & spanners  For wind back brake systems  For right hand thrust bolts Comes with adaptor plate  For use with most makes & models  Side 1: 32mm (1 1/4") Side 2: 22mm...

Suitable for removal of brake caliper fasteners for: Ford (Focus and Edge), Mercedes Benz & Volvo. 11mm Hex Bit Socket (Length: 55mm) 11mm Hex Bit Socket (Length: 100mm) 1/2" Drive Bit made from strong S2 material

Brake bleeder wrenches that are designed to simplify brake bleeding. The additional ease of access will in many cases allow the operator to bleed the brakes without removing the wheels. Wrench sizes: 8, 10 and 11mm Colour coded for easy...

US PRO Tools Brake Caliper Piston Rewind Tools Left handed Set Wind Back Kit For wind back brake pistons with left hand thrust bolt Includes double sided adaptor plate Hex end for use with sockets or spanners Distance between pin centers: Side 1: 32mm...

This tool set enables the rewinding of pistons back into the core on most disc brake calipers. Allows you to service and replace worn brake pads. Includes both right-hand and left-hand threaded rewind tools. Master set of adaptors for a wide range of...

Adaptor specifically introduced for VAG pistons on models with EPB 3 pin brake piston wind back tool For use on VAG models, Renault Megane and Scenic and Volvo fitted with Electronic Park Brakes To be used in conjunction with electronic park brake tools...

Removes brake cylinder by expanding and holding the retainer ring. For GM "J" and "X" body cars Originally designed as a tool to remove the tab-type retaining clip on American GM brake cylinder assembly.  Suitable for removal and installation of...