Lifting & Towing

Specially Designed to hook to a crane or hoist to handle and position large, bulky components. The horizontal tilt can be adjusted to compensate for off-center loads, Ideal for engines and gearboxes or adjusted to a certain angle for a component...

A 4 metre (13 ft approx) towing chain made from 8mm high grade 43 chain with grab hook at either end. Having a Working Load Limit (WLL) of 1770 kgs makes it ideal for car recovery. Not to be used for overhead lifting. Supplied in case • 4 Metres...

High quality strong, sturdy 2 ton vehicle jack. 140mm to 290mm height range Rear castors rotate for easy, control and manoeuvre ability. Built-in one piece hydraulic unit with pump-through action designed to prevent the handle locking at maximum...

Simple but highly effective Lifting Chain slings are designed for use in a various selection of industrial, construction and rigging applications. This Sling has a Working Load Limit (WLL) of 2.8 Tonnes and conforms to EN 818-4 (Grade 80). The grab hooks...

Toolzone 3M x 60mm 2000kg Webbing Sling This webbing sling is designed to lift heavy loads, from 0 - 2000kg. Webbing slings are flexible, lightweight and have a wide bearing surface, which helps protect the load you are lifting...

A low profile trolley jack with a 3 Ton lifting capacity. Fitted with quick action, twin piston for rapid lift, a safety valve to avoid overloading and a release mechanism for controlled lowering. Capacity: 3 Ton Lifting range: 75mm - 505mm (3" - 19"...

A Clevis Sling Hook with a Working Load Limit (WLL) of 3.15 Tonnes and conforms to EN 818-4 (Grade 80), for use with 10mm chain. It is important to ensure that adequate safety precautions are adhered to at all times in all aspects of the particular...

Simple but highly effective Lifting Chain slings are designed for use in a various selection of industrial, construction and rigging applications. This Sling has a Working Load Limit (WLL) of 2 Tonnes and conforms to EN 818-4 (Grade 80). It is important...

Simple but highly effective Lifting Chain slings are designed for use in a various selection of industrial, construction and rigging applications. This Sling has a Working Load Limit (WLL) of 6.7 Tonnes and conforms to EN 818-4 (Grade 80). The grab hooks...

Simple but highly effective Lifting Chain slings are designed for use in a various selection of industrial, construction and rigging applications. This Sling has a Working Load Limit (WLL) of 4.25 Tonnes and conforms to EN 818-4 (Grade 80). The grab...

A Clevis Sling Hook with a Working Load Limit (WLL) of 2 Tonnes and conforms to EN 818-4 (Grade 80), for use with 8mm chain. It is important to ensure that adequate safety precautions are adhered to at all times in all aspects of the particular lifting...